Pages

Mar 22, 2013

You Should Wear a Red Shirt on Your Online Dating Profile

If you want to improve your chance of getting a date on any online dating site, you should wear a red shirt. Slate took a look at various studies comparing the same person wearing different colored clothes and each time, red was the most successful color. Do it. Change your online profile now.

It's like the secretly effective scarlet letter. One study showed a picture of the same woman bordered in different colors and the picture bordered in red was found to be more attractive and sexually appealing. It was the same woman! Another study showed 64 women on online dating sites. Their shirt was rotated between six different colors and red won out again. Slate says:
Twenty-one percent of their emails arrived when they wore red, whereas the other colors-black, white, yellow, green, and blue-attracted 14 to 17 percent of the total.
Moral of the story: wear red. It works for guys too. Read more about why here.

Pepsi’s Plastic Bottle Design Gets a Swirliie

Pepsi has redesigned the shape of its 16-ounce and 20-ounce plastic bottles for the first time in 16 years. Move the arrows on the slider above back and forth to see the a before and after comparison.

The slider isn't meant to be a 1:1 model, of the actual bottle sizes but it gives you an idea of the leaner look Pepsi is going for. The snazzy new shape sure has a refreshing plastic swirl to it, huh? It's more lively than the dated look from 1997.

AdAge reports that the new bottles will begin shipping in April but it could take until the end of the year for the nationwide turnover to be complete. More here.

Mar 21, 2013

A Sleek Clock Radio for Rocking out to Top 40 Hits

Maybe you're old fashioned and you just want to listen to the radio sometimes. Here's Lexon Design's Modern Titanium clock to satisfy your old school desires.

The AM/FM radio is $130 on the Fancy right now. Made out of aluminum (even though it has titanium in the name for some reason), it comes in white and black and has an auto-dimmer switch. It's otherwise simple and basic, but sometimes that's what you're going for. More here.

Mar 20, 2013

One Little Tweak Makes a Vastly Improved Soap Dispenser

There hasn't been much innovation in the soap dispenser world since self-pumping sensor-activated models entered the picture. But those can easily break and/or run out of batteries rendering their hands-free advantages moot. Which is why the simple design improvements of Joseph Joseph's new C-Pump are so brilliant.

The C-shaped dispenser is still manually operated, but it lets you use the back of your hand, which is presumably not the side that needs cleaning, to help minimize the spread of germs. After all, how often do you really clean the pump dispenser that you touched before washing your hands? The answer is probably never. So if for $27 you don't pass along that cold to someone else, the C-Pump design is more than worth its weight in liquid soap. More here.

Ladies and Gentlemen, We Have Left the Solar System

For the very first time, a man-made object has reached the cosmic abyss beyond the farthest reaches of our solar system. As of today, Voyager 1 is the first spacecraft to begin the endless journey into deep space.

Launched way back on September 5th, 1977, Voyager 1 has been blasting along towards the edges of the heliosphere at 10.72 mile per second, faster than any other man-made object to date. On its way out there, it explored Jupiter in '79 and Saturn in '80. We've known Voyager 1 was going to peace out sooner or later, but now a study in published Geophysical Research Letters has made it official.

From the release:
Thirty-five years after its launch, Voyager 1 appears to have travelled beyond the influence of the Sun and exited the heliosphere, according to a new study appearing online today.
The heliosphere is a region of space dominated by the Sun and its wind of energetic particles, and which is thought to be enclosed, bubble-like, in the surrounding interstellar medium of gas and dust that pervades the Milky Way galaxy.
Voyager 1 isn't headed toward any particular star, but it'll be making a "close" (1.6 lightyear) flyby past Gliese 445 in just 40,000 years. Don't expect to hear about that though; strategic shutdown of its sensors will start in 2020, and by 2030, there won't be any power left. But there will be a little—albeit lifeless—bit of humanity cruising endlessly among the stars. And that's awesome, in the most literal way. More here.

Mar 19, 2013

Science, Not Magic, Guarantees You’ll Never Get Lost Wearing This Pendant


In what could be the most stylish camping accessory ever created, Meister designed this gold and titanium pendant that transforms into a functioning compass. So whether you're deep in the woods, or strutting down a runway, you'll theoretically never get lost with some basic survival skills. That, and just over $3,000 for the pendant. I'll stick with hunting for moss on a tree. More here.

This Desk Assembles With Nothing But Manual Labor




If you end up doing more harm than good when tools are around, you'll love Fraaheid's collection of easy-assembling tables designed by a trio of Amsterdam-based architects. Cut from a single sheet of plywood, the tables use a series of strategic slots and grooves to assemble in less than three minutes without the need for a single hammer, screw driver, or roll of duct tape.

Ranging in price from $165 to $1,156 you'll pay dearly for convenience here. But the use of exposed seams and visible t-shaped joints on all of the tables in the collection at least ensure you'll have a unique piece in your home or office. And all of your fingers intact. More here.

UAE Opens Biggest Solar Power Station In The World

The Shams Power Company opened their Shams 1 concentrated solar power station this week in Abu Dhabi. The station generates 100 MW and can power 20,000 homes while reducing CO2 emissions by 175,000 tons per year.

Not to be outdone, two companies in California proposed solar towers yesterday that will generate 500 MW and power about 200,000 homes. But the Shams 1 project still holds the biggest solar station title for now. The project took about two years and $600 million to build. Shams 1 has 258,048 parabolic mirrors that collect sunlight which hits heat-transfer fluid and then flows through tubes to a heat exchanger. This process creates steam, which powers turbines to generate electricity.

On the energy front, the United Arab Emirates is mostly known for oil and natural gas, but that doesn't mean they can't build the largest solar station in the world in two years. Look, if you have the desert space you might as well go big. More here.

Mar 18, 2013

An iPhone in Different Colors Looks Fantastically Fun


People want choices! People want colors! People want to obsess over the perfect hue of yellow, have dreams about how to describe cyan and flash their Ferrari red iPhone on the street. I'm sure if Apple ever released these phones, a black or white iPhone would look as outdated as a black and white TV. Okay, maybe not that bad. But still, dripping the iPhone in any sort of colored dye would make those people who slap chintzy cases from China go nuts.

Would you want an iPhone to come in different colors? What about at least having the option to choose a different color? More here.

Mar 17, 2013

Geometric Coat Racks Play Tricks on Your Eyes

These coat racks are deceiving. On first glance, you can't quite tell if they're 2D or 3D, as if you'd lost all depth of field.

The collection—designed by John Tony from +tongtong—is called Les Ailes Noires. It includes 11 different geometric-shaped racks that are supposed to stand alone and lean against the wall or lie on a flat surface. They're so simple, but the way they react to light and shadow draws your eye to them. If only geometry had been this interesting—and practical—when you were learning it in school. More here.

Mar 16, 2013

Making Salt Water Drinkable Just Got 99 Percent Easier

Access to steady supplies of clean water is getting more and more difficult in the developing world, especially as demand skyrockets. In response, many countries have turned to the sea for potable fluids but existing reverse osmosis plants rely on complicated processes that are expensive and energy-intensive to operate. Good thing, engineers at Lockheed Martin have just announced a newly-developed salt filter that could reduce desalinization energy costs by 99 percent.

The Reverse Osmosis process works on a simple principle: molecules within a liquid will flow across a semipermeable membrane from areas of higher concentration to lower until both sides reach an equilibrium. But that same membrane can act as a filter for large molecules and ions if outside pressure is applied to one side of the system. For desalinization, the process typically employs a sheet of thin-film composite (TFC) membrane which is made from an active thin-film layer of polyimide stacked on a porous layer of polysulfone. The problem with these membranes is that their thickness requires the presence of large amounts of pressure (and energy) to press water through them.

Lockheed Martin's Perforene, on the other hand, is made from single atom-thick sheets of graphene. Because the sheets are so thin, water flows through them far more easily than through a conventional TFC. Filters made through the Perforene process would incorporate filtering holes just 100 nm in diameter—large enough to let water molecules through but small enough to capture dissolved salts. It looks a bit like chicken wire when viewed under a microscope, John Stetson, the Lockheed engineer credited with its invention, told Reuters. But ounce for ounce, its 1000 times stronger than steel.

"It's 500 times thinner than the best filter on the market today and a thousand times stronger," Stetson explained to Reuters. "The energy that's required and the pressure that's required to filter salt is approximately 100 times less."

Lockheed is reportedly already ramping up production efforts for the filters—and trying to find a way to keep them from tearing—though there are no announced plans on when they'd hit the market. More here.

Mar 14, 2013

Measuring Beakers Make Your Kitchen Into the Lab You Always Wanted

Baking is pretty much basic science, so you might as well use some measuring beakers in the process. And they're a lot more exciting than your run of the mill measuring spoons and cups.

The awesome, colorful set comes in 1-ounce, 2-ounce, tablespoon, and teaspoon sizes for $10. It's made by Oxo, the same company behind plenty of clever cooking accessories. You might never be a chemist, but you can at least play one in the kitchen. More here.

Here Are the Samsung Galaxy S IV’s Guts


Samsung is just about to announce the Galaxy S IV but the same Chinese site that showed us in clear detail what the S IV will look like on the outside has decided to pry open the giant superphone and expose its innards too. An 8-core processor, 13 megapixel camera and motion detector too. You can peep all the guts here.

These Earbuds Will Make It Look Like a Pencil Is Sticking Through Your Brain

When someone puts on earbuds, they're pretty much telling the rest of the world to not bother them. It's the universal symbol for shut the hell up. But if someone put on this Magic Pencil earbuds? That's a conversation starter. I mean, these earbuds make it look like a pencil has been stabbed in one ear and out the other. They're hilarious!

I'd totally extend this motif and get an arrow, a knife, a sword, a lightsaber and whatever else long and slender object to make it look like my brains been sliced. $50 at Fancy. More here.

Mar 13, 2013

Build This Lego Leica M9-P Hermes and Save Yourself $49,962

Lego master builder Chris McVeigh has cooked up a playful alternative to Leica's obscenely and pointlessly expensive $50,000 M9-P ‘Edition Hermès'. The Lego version doesn't actually take photos, but you'll also pay only $38 for a kit if you can't scrounge all the parts needed to assemble it.

Or, if your Lego stocks already have every piece you need, you can save yourself even more money by just downloading the PDF build instructions McVeigh has kindly provided on his site. Oh and if you don't like the Hermes Edition, you can always build the standard model by just switching up your color palette. More here.

Bear Grylls and Kyocera Torque do the Business of Survival

Mar 12, 2013

Adding Spinning Dials To a Rubik’s Cube Is Downright Evil

Unless you're some kind of prodigy who can solve one while juggling, making pancakes, and whistling Dixie, the Rubik's cube is already difficult enough. So why on earth would someone go and add a numbered, spinning dial to each side? That's just sadistic.

You could argue that Brando's $80 Roulette Wheel IQ Cube is actually a simpler version of the standard Rubik's Cube since it only features four segments per side. But it's the addition of that dial that takes the difficulty level from child's play to Mensa challenge. However, no matter how scrambled it might become, as long as these manufacturers keep cheaping out and using decals instead of paint, it's just a couple of hours of peeling and re-sticking to easily 'solve' it again. More here.

Mar 11, 2013

Clip-On Recorder Simplifies Everything But the Legality Of Recording a Phone Call

Recording a conversation on your smartphone isn't as easy as you think it would be. Varying state-by-state laws make the legality a bit of a gray area, and if you don't have access to the free Google Voice service, you're going to have pay a monthly fee to capture a call. Or, put up with the U2 Mobile Recorder hanging off your handset.

In a round-about way the $134 U2 Mobile Recorder simplifies the act of recording a call on your iPhone or Android-based device. You just plug it into the top-mounted headphone jack of any phone except the iPhone 5, and hit record. Four gigs of non-expandable storage should be able to hold up to 144 hours of conversations, and a USB port allows the recordings to be dumped off to your PC. It's also got its own headphone jack for immediately transcribing a conversation, and on a single charge it can record or play back for about 20 hours. Which is perfect for even the most long-winded of snitches. More here.

Electronic Sensor Tattoos Can Now Be Printed Directly Onto Human Skin

Thanks to the same people that brought us the stick-on electric tattoo and stretchable battery, we're now looking at a future of electronic sensors that can be printed directly onto human skin.

At least for now, it seems like the sensors will be mainly used for medical purposes; they'll be able to monitor skin hydration, temperature, and any electric signals from muscle and brain activity. And unlike their stick-on precursor, these skin-printed tattoos don't use the easily-washed-off polymer backing, which as it turns out, wasn't even necessary in the first place.

Instead, the Rogers research group at the University of Illinois at Urbana-Champaign found that, by printing the electronic mesh directly onto skin, the sensor (which is held together and remains flexible thanks to special serpentine wires) becomes 1/30 the size and even conforms better to that body's natural bumps and curves. With the help of a "very robust" spray-on bandage, that sucker has a good two weeks before it begins to flake off. Of course, a longer shelf-life would require embedding the device underneath the top layer of skin, just like a real tattoo. In which case—uh oh—I'm pretty sure I know how that movie ends.

Still, with these advances and the current massive interest in wearable, body-monitoring tech, it's only a matter of time before health-tracking diehards demand taking wearable to within. What's more, these sensors could even be hooked up to interact with any number of external devices. The possibilities are truly exciting, and in a certain light, mildly terrifying. But whether we're ready for it not, the future, it seems, is here. More here.